Cleaning the Terminal
The PDT 7500 requires a minimal amount of maintenance. To prolong its life and avoid
problems, keep the terminal clean. Use a clean, soft cloth dampened with a mild cleanser such
as soap and water to clean the terminal. Do NOT use cleaners containing a high percentage
of alcohol, such as Isopropyl Alcohol. Do NOT use abrasive paper/cloth or abrasive/
corrosive cleaners.
Wipe the entire terminal, except for the scanner window. Wipe the scanner window
periodically with a lens tissue or other material suitable for cleaning optical material such as
eyeglasses.
Storage
If the terminal will not be used for longer than a week, store it in a cool, dry place away from
dust. Remove the battery pack and repackage the terminal in its original shipping container.
To store the terminal for a shorter period of time (a few days), leave the batteries in the
terminal. Note that if the battery pack is left in the terminal for an extended amount of time,
any data stored on the terminal may be lost. The Lithium-Ion battery pack must be kept
charged to avoid loss of data.
Note: If you leave the terminal without a main battery pack for longer than
5 minutes, the terminal will automatically reboot. All non-volatile
data is lost and you must reset the date and time.
Maintenance and Troubleshooting
11-3