Table of Contents
Advertisement
Suunto Traverse Alpha
TIP: You can also check your location while you are recording an activity by keeping
[NEXT] pressed to access NAVIGATION in the options menu or by pressing [START] while in
the breadcrumb display.
3.20.2. Adding a POI
Suunto Traverse Alpha allows you to save your current location or define a location as a POI.
You can store up to 250 POIs in the watch.
When adding a POI, select a POI type (icon) and POI name from a predefined list.
To save a POI:
1. Press [START] to enter the start menu.
2. Scroll to NAVIGATION with [START] and press [NEXT] .
3. Scroll to Location with [LIGHT] and press [NEXT] .
4. Select Current or select Define to manually change longitude and latitude values.
5. Press [START] to save the location.
6. Select a suitable name for the location. Scroll through the name options with [START] or
[LIGHT] . Select a name with [NEXT] .
7. Press [START] to save the POI.
NOTE: When recording a hunting or fishing activity, long pressing [VIEW] displays a
shortlist of activity-specific POIs. To view the entire list, select SHOW ALL.
TIP: You can quickly save your current location as a POI by keeping [VIEW] pressed. This
can be done from any display when not recording an activity.
3.20.3. Deleting a POI
You can delete a POI directly in the watch.
To delete a POI:
1. Press [START] to enter the start menu.
2. Scroll to NAVIGATIONwith [START] and press [NEXT] .
3. Scroll to POIs (Points of interest) with [LIGHT] and press [NEXT] .
4. Scroll to the POI you wish to delete with [START] or [LIGHT] and select with [NEXT] .
5. Scroll to Delete with [START] and press [NEXT] .
6. Press [START] to confirm.
3.21. Routes
You can create a route in Movescount, or import a route created with another service.
To add a route:
1. Go to www.movescount.com and log in.
2. Sync your Suunto Traverse Alpha with Movescount using Suuntolink and the supplied USB
cable.
Routes could also be deleted through Movescount.
28
Advertisement
Table of Contents
