Calibrating Pods - Suunto AMBIT2 User Manual

● Check that you are wearing the heart rate belt correctly (see Section 12.4
Putting on heart rate belt on page 72).
● Check that the electrode contact areas of the heart rate belt are moist.
For more information on pairing PODs, see the POD user guide.

15.1 Calibrating PODs

You can use your Suunto Ambit2 to calibrate Suunto Foot POD for accurate
speed and distance measurement. Perform the calibration on an accurately
measured distance, for instance, on a 400 meter running track.
NOTE: Foot POD refers to both Suunto Foot POD Mini and Suunto ANT+ Foot
POD.
To calibrate Suunto Foot POD with Suunto Ambit2:
1. Attach Suunto Foot POD to your shoe. For more information, see Suunto
Foot POD Mini Quick Guide or Suunto Foot POD User Guide.
2. Choose a sport mode (for example Running) in the start menu.
3. Start running at your usual pace. When you cross the starting line, press
[Start Stop] to start the recording.
4. Run a distance of 800 1000 meters (about 0.500 0.700 miles) at your usual
pace (for example two laps on a 400 meter track).
5. Press [Start Stop] when you reach the finish line to pause the recording.
6. Press [Back Lap] to stop recording. After stopping the exercise, save the log
by pressing [Start Stop]. If you do not want to save the log, press [Light
Lock].
en
111