Navigating To A Poi - Suunto SPARTAN SPORT WRIST HR BARO 1.12 User Manual

Suunto Spartan Sport Wrist HR Baro
1. Swipe down or press the upper button to open the launcher.
2. Scroll to Navigation and tap on the icon or press the middle button.
3. Swipe up or press the lower button to scroll down to Your location and press the middle
button.
4. Wait for the watch to activate GPS and find your location.
5. When the watch displays your latitude and longitude, press the upper button to save your
location as a POI and select the POI type.
6. By default the POI name is the same as the POI type (with a running number after it). You
can edit the name later in Movescount.
Deleting POIs
You can remove a POI from you watch either by deactivating the Use in watch setting for the
POI in Movescount or by deleting the POI from the POI list in the watch.
To delete a POI in your watch:
1. Swipe down or press the upper button to open the launcher.
2. Scroll to Navigation and tap on the icon or press the middle button.
3. Swipe up or press the lower button to scroll down to POIs and press the middle button.
4. Scroll to the POI you want to remove from the watch and press the middle button.
5. Scroll to the end of the details and select Delete.
When you delete a POI from your watch, the POI is not permanently deleted. The next time
you sync your watch with Movescount, the POI you deleted is deactivated.
To permanently delete a POI, you need to delete the POI in Movescount.
To permanently delete a POI:
1. Go to your watch settings in Movescount.
2. Expand the NAVIGATION section and then POIS (POINTS OF INTEREST).
3. Scroll to the POI you want to delete and click on the trash bin icon.
4. Sync your watch with Movescount using SuuntoLink (USB cable) or Suunto Movescount
App (Bluetooth) to also remove the POI from your watch POI list.

3.25.2. Navigating to a POI

You can navigate to any POI that is in your watch POI list.
NOTE: When navigating to a POI, your watch uses full power GPS.
To navigate to a POI:
1. Swipe down or press the upper button to open the launcher.
2. Scroll to Navigation and tap on the icon or press the middle button.
3. Scroll to POIs and press the middle button to open your list of POIs.
4. Scroll to the POI you want to navigate to and press the middle button.
5. Press the upper button to start navigating.
6. Press the upper button again at any time to stop navigating.
The POI navigation has two views:
• POI view with direction indicator and distance to the POI
32