How To Adjust The Sensitivity - Omron HJ-109 Instruction Manual

EN-02-19[HJ109]-7

How to Adjust the Sensitivity

This unit is adjusted to +/– 5% accuracy (+/– 5 steps
against 100 steps) measured by standard walking on a
flat surface in the correct posture.
•
Attach your digital pedometer
properly and walk 100 steps.
•
If the step count displayed is 5
steps or more than actual, shift the
ADJ. Knob slightly to the negative
d
( ) side.
•
If the step count displayed is 5
steps or less than actual, shift the
ADJ. Knob slightly to the positive
e
( ) side.
Repeat the 100 steps test again and
adjust the ADJ. Knob accordingly till
you reach the +/– 5 steps count
accuracy against your actual strides.
NOTE:
Readjust the sensitivity if you change your pace of jogging,
walking or competitive walking etc.
13
Move the knob to the
negative (–) side.
Move the knob to the
positive (+) side.
Before Using The Unit How To Use The Unit
6/30/03, 2:27 PM
13