Preface - Toshiba e-Studio 383P User Manual

P
REFACE
Every effort has been made to ensure that the information in this document is complete,
accurate, and up-to-date. The manufacturer assumes no responsibility for the results of
errors beyond its control. The manufacturer also cannot guarantee that changes in software
and equipment made by other manufacturers and referred to in this guide will not affect
the applicability of the information in it. Mention of software products manufactured by
other companies does not necessarily constitute endorsement by the manufacturer.
While all reasonable efforts have been made to make this document as accurate and helpful
as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or
completeness of the information contained herein.
©2012 TOSHIBHA TEC CORPORATION All rights reserved.
Hewlett-Packard, HP, and LaserJet are registered trademarks of Hewlett-Packard
Company.
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
ENERGY STAR is a trademark of the United States Environmental Protection Agency.
Apple, Macintosh, Mac and Mac OS are registered trademarks of Apple Inc.
Other product names and brand names are registered trademarks or trademarks of their
proprietors.
This product complies with the requirements of the Council Directives 2004/108/
EC (EMC), 2006/95/EC (LVD), 1999/5/EC (R&TTE), 2009/125/EC (ErP), and
2011/65/EU (RoHS), as amended where applicable on the approximation of the
laws of the member states relating to electromagnetic compatibility, low voltage,
radio & telecommunications terminal equipment, and energy using products.
The following cables were used to evaluate this product to achieve EMC directive
2004/108/EC compliance and configurations other than this may affect that compliance.
CABLE TYPE
Power
USB
Parallel
LAN
Working environment
From EMC (Electromagnetic Compatibility) point of view, the operation of this product is
being restricted in following environment:
Medical Environment: This product is not certified as a medical product according to the

Medical Product Directive 93/42/EEC.
Any consequences resulting from the use of this product in restricted working environments
are not the responsibility of TOSHIBA TEC.
The consequences of the use of this product in restricted working environments may be an
electromagnetic interference with other devices or machines in the nearby surrounding
area. This can result into malfunction including data loss / data error pertaining to this
product or the other devices / machines involved in the electromagnetic interference.
Furthermore, for general safety reasons, the use of this product in environments with
explosive atmospheres is not permitted.
LENGTH CORE
(METRE)

1.8
5 
1.8 

15
Preface > 3
SHIELD



