Compaq Presario V3500 Maintenance And Service Manual page 80

Remove the Phillips PM2.5×9.0 screw that secures the display assembly to the computer.
2.
Turn the computer display-side up, with the front toward you.
3.
Open the display as far as possible.
4.
Disconnect the following cables:
5.
(1) Display panel cable
(2) Display switch module cable
(3) Microphone cable
Remove the wireless antenna cables (4) from the hole in the system board and the routing
6.
channels (5) built into the top cover.
CAUTION:
the display assembly can result in damage to the display assembly and other computer components.
Remove the five black Phillips PM2.5×7.0 screws (1) that secure the display assembly to the
7.
computer.
72 Chapter 4 Removal and replacement procedures
Support the display assembly when removing the following screws. Failure to support