Compaq Presario V3500 Maintenance And Service Manual page 68

NOTE:
white WLAN antenna cable is connected to the WLAN module "Aux" terminal.
NOTE:
additional wireless antenna cable (2), yellow in color.
Remove the two Phillips PM2.0×3.0 screws (3) that secure the WLAN module to the computer. (The
5.
edge of the module opposite the slot rises away from the computer.)
Remove the WLAN module (4) by pulling it away from the slot at an angle.
6.
NOTE:
WLAN module slot.
Reverse this procedure to install a WLAN module.
60 Chapter 4 Removal and replacement procedures
The black WLAN antenna cable is connected to the WLAN module "Main" terminal. The
Computer models equipped with an 802.11a/b/g/n WLAN module will have an
WLAN modules are designed with a notch (5) to prevent incorrect installation into the