Top cover (see
f.
Wireless switch board (see
g.
Audio board (see
h.
Bluetooth module (see
i.
USB board (see
j.
Remove the system board:
Disconnect the power connector cable (1) from the system board.
1.
Remove the two black Phillips PM2.5×4.0 screws (2) that secure the system board to the computer.
2.
Use the optical drive connector (1) to lift the right side of the system board until it rests at an angle.
3.
Release the system board (2) by sliding it to the right at an angle until the connectors on the left side
4.
of the system board disengage from the base enclosure.
Remove the system board (3).
5.
96
Chapter 4 Removal and replacement procedures
Top cover on page
80)
Wireless switch board on page
Audio board on page
Bluetooth module on page
USB board on page
90)
85)
88)
89)