AIRFLOW
Damper
The fresh food compartment receives chilled air via an electronic damper that is positioned at the top
rear of the fresh food compartment. The damper is controlled by the main control board and when
open, allows the evaporator fan to push chilled air from the evaporator into the fresh food compartment.
To remove the damper
1. Remove the light cover.
2. Remove 8 Phillips screws and the light
assembly.
3. Disconnect the damper wiring.
4. Remove 2 Phillips screws and the damper.
Light Assembly
Screws
Screws
Screws
P0003387
Damper
P0003380
– 14 –