Table of Contents
Advertisement
2 − Features of the CD-RW901MKII
Front panel
POWER switch
The power switch is used to switch
1
the unit on and off.
Disc tray
Discs should be placed label side upwards
2
in the disc tray. When a disc is loaded into the unit, the
display shows
T O C R e a d i n g
the unit determines the contents of the disc.
MENU key
Use this key to call up the menu options
3
(see "Operation basics" on page 16).
OPEN/CLOSE key
Use this key to open and close the
4
disc tray. The display shown
opening and
when the tray is closing.
C l o s e
REPEAT key
Use this key to set the repeat playback
5
mode on and off.
ESCAPE key
When in a menu mode, this key cancels
6
the menu item selected.
DISPLAY key
Use this key to see the current disc title
7
when the disc is stopped. When the disc is playing or in
ready mode, press this key to see the current track title.
TIME key
Use this key to cycle through the time
8
modes shown on the display (see "Time display switch-
ing" on page 20).
Display
The display is used to show the current status
9
of the unit, as well as the current menu settings.
TIMER switch (PLAY, OFF)
0
Timer play on and off. See "Timer playback" on page
21 for details.
INPUT (L,R) controls
Use these concentric controls to
q
adjust the level of the analog audio signals received at
ANALOG IN
the
jacks.
PHONES jack and the level control
w
pair of stereo headphones, equipped with a 1/4-inch
plug, with this jack.
Adjust the volume from the jack with the level control
(turn clockwise for higher volume).
10
TASCAM CD-RW901MKII
for a short period while
when the tray is
O p e n
Using this key switches
Use a standard
PITCH control
Push this control to set the Pitch
e
Control on and off. Turning this control adjusts the
value within ±16.0%.
AUTO CUE key
Use this key to set Auto Cue on and off.
r
AUTO READY key
Use this key to set Auto Ready on
t
and off.
CALL key
Pressing this key locates a track to the last
y
point where playback was previously started in playback
ready mode, and puts the unit into playback ready mode.
During recording, pressing this key assigns an index
number manually.
MULTI JOG dial
Use this dial to select tracks for play-
u
back, to set parameter values.
In addition, pushing the dial acts like an
the currently-displayed value or setting is confirmed.
FINALIZE/INS key
Use this key to finalize recordable
i
discs (see "Finalizing" on page 33).
When in playback or playback ready mode, pressing
this key shows the disc's ISRC code on the display.
It also acts like a space key when entering TEXT data
(see "Title input operation" on page 35).
ERASE/DEL key
Use this key (with CD-RW discs
o
only) to erase tracks, or a whole disc, or to refresh
a "bad" disc, or to unfinalize a finalized disc (see
"Erasing" on page 34 for details).
When in playback or playback ready mode, pressing
this key shows the disc's RID code on the display.
It also acts like a delete key when entering TEXT data
(see "Title input operation" on page 35).
ENTER
key, i.e.
Advertisement
Table of Contents
