Maintenance; Air Cleaner - Husqvarna 170BT, 170BF Operator's Manual

Husqvarna blower operator's manual
Hide thumbs Also See for 170BT, 170BF:
Table of Contents

Advertisement

Maintenance, replacement, or repair of the emission control device and systems may be performed by any non-road engine repair
establishment or individual.
System/Compornent
Air Filter
Prefilter
Paper Filter (170 only)
Fuel Leaks
Fuel Filter
Fuel Line
Spark Plug
Muffler
Bolts on muffler
Entire unit
Muffler Spark Arrester
Cooling System
Screws/Nuts/Bolts
Cylinder Exhaust Port
WARNING
Make sure that the engine has stopped and is cool before performing any service
to the blower. Contact with rotating blower fan or hot muffler may result in a
personal injury.

AIR CLEANER

• Check the air cleaner before use.
A clogged air filter may increase fuel consumption while cutting down the engine
power.
• Never operate the blower without an air filter or with a deformed or broken filter
element because unfiltered dusty air will quickly ruin the engine.
[170BT/170BF]
• Never clean the paper filter by tapping on it. Doing so may break the element,
causing dust to get sucked into the blower and damaging the engine.
CLEANING AIR FILTER:
[130BT] (F27)
1. Unscrew the knob and remove the air cleaner cover.
(1) Knob
(2) Element
(3) Screen
2. Wash the filter element in fresh, non flammable cleaning solution (ex. warm soapy
water) and then dry.
(Clean the air filter once in a week.)
3. Reinstall the filter. Never forget to attach the screen. If the screen is not attached,
the cleaner will not seal properly and the dusts come into the cylinder.
4. Hook the slots of cover (4) on the tabs of body (5) and screw the knob.
[170BT/170BF] (F28)
1. Unscrew 2 knob bolts and remove the air cleaner cover. Then remove the prefilter
mounted inside the air cleaner cover.
(1) Knob Bolt
(2) Prefilter
(3) Paper Filter
2. Wash the prefilter in fresh, non flammable cleaning solution (ex. warm soapy water)
and then dry.
(Clean the air filter once in a week.)
3. Exchange the paper filter element with new one in case it has been contaminated.
WARNING
• This prefilter is dry type.
• Never wash the prefilter in an oily cleaning solution.
• Never include oil in the wash.
• Do not clean the paper filter by tapping on it.

Maintenance

Daily or
Procedure
Before use
Inspect/Clean
Inspect/Replace
Inspect/Replace
Inspect/Replace
Inspect/Clean
Inspect/Clean
Inspect/Clean
Tighten
Inspect/Replace
Inspect/Clean
Inspect/Clean
Tighten
Inspect/Clean
Every 25
Every 50
hours after
hours after
F27
(1)
(4)
(3)
F28
English
Every 100
hours after
(2)
(5)
[130BT]
[170BT]
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

130bt

Table of Contents