Maintenance; Introduction - Husqvarna Aspire B8X-P4A Operator's Manual

2. Push the battery into the battery holder until you
hear a click. The battery must move easily, if not,
it is not installed correctly. (Fig. 27)
To start the product
1. Push and hold the start button until the green LED
comes on. (Fig. 28)
2. Use the power trigger to operate the product.
To set the optimal airflow for your work
• Push the speed control button to set the airflow.
There are 3 airflow steps. (Fig. 29)
To stop the product
1. Release the power trigger.
2. Push and hold the power button until the green LED
comes off.

Introduction

WARNING:
maintenance work you must read and
understand the safety chapter.

Maintenance

Clean the product with a clean and dry cloth. Do not use water.
Make sure that the handles dry and clean.
Do a check of the keypad.
Do a check of the power trigger.
Make sure that nuts and screws are tight.
Make sure that the battery is not damaged.
Do a check of the battery's charge.
Make sure that the release buttons on the battery is not damaged and locks the
battery into the product.
Make sure that the battery charger is not damaged.
Make sure that all couplings, connections and cables are clean and not dam-
aged.
Do a check of the connections on the battery, on the battery charger and on the
product.
To do a check of the air intake
1. Make sure that there is no blockage in the air intake.
(Fig. 32)
1876 - 003 - 27.09.2022
Maintenance
Before you do any
3. Push the release button and pull out the battery.
(Fig. 30)
To do a check of the state of charge
1. Push and hold the start button until the green LED
comes on.
2. Make sure that the power trigger is not pushed in.
3. Refer to the battery status indicator. Each LED show
1/3 state of charge. (Fig. 31)
Automatic shutdown function
The product has an automatic shutdown function that
stops the product if it is not used. The product shuts
down after 3 minutes.
Maintenance schedule
WARNING:
you do maintenance.
The following is a list of the maintenance steps that you
must do on the product.
Daily
X
X
X
X
X
X
X
X
X
2. Stop the product and remove unwanted material if it
is necessary.
Remove the battery before
Weekly Monthly
X
X
315