Password Function - Mitsubishi Electric XD205U User Manual

Password function

This projector is equipped with the password function that is
designed for prevention of wrong operation by children and
restriction on operation by other than specified users.
MENU ACCESS ............All the buttons except for the POWER
button on the projector are disabled. (The buttons on the
remote control are enabled.) You can use this mode as a
measure of prevention of wrong operation by children and
restriction on operation by other than specified users.
To enable the password function:
1. Display the FEATURE menu.
2. Press the or button to select PASSWORD FUNC-
TION.
3. Press the ENTER button.
• The screen for setting the password function will
appear.
opt.
MENU ACCESS
LOCK
UNLOCK
• When the password has already been set, the mode
won't be changed. In such cases, press the ENTER
button to cancel the password function and try again.
4. Press the ENTER button.
• The screen for entering a password will appear.
PASSWORD
CONFIRM
O K
5. Press the or button to select a number from 0 to 9.
6. Press the button.
• You can set the next digit.
7. Repeat steps 5 and 6 to set a four-digit password.
8. Enter the password again for confirmation using the same
steps.
9. Select OK, and press the ENTER button.
• If the entered passwords don't match, an error mes-
sage will appear.
• To cancel the procedure, select CANCEL, and press
the ENTER button.
• You can cancel the procedure by pressing the MENU
button alternatively.
XGA60
OK
OK
CANCEL
To cancel the password function:
1. Display the FEATURE menu.
2. Press the or button to select PASSWORD FUNC-
TION.
3. Press the ENTER button.
• The screen for canceling the password function will
appear.
opt.
MENU ACCESS
LOCK
UNLOCK
4. Press the ENTER button.
• The screen for entering the password will appear.
PASSWORD
O K
5. Press the or button to select a number from 0. to 9.
6. Press the button.
• You can set the next digit.
7. Repeat steps 5 and 6 to enter the four-digit password.
8. Press the button, select OK, and press the ENTER but-
ton.
• If you enter a wrong password, an error message will
appear.
• To cancel the procedure, press the
CANCEL, and press the ENTER button.
• You can cancel the procedure by pressing the MENU
button alternatively.
Important:
• If you forget your password, keep pressing the MENU and
ENTER buttons on the control panel at the some time about
three seconds to cancel the password function.
XGA60
OK
OK
CANCEL
button, select
EN-21