Time observation and time splitting
1 Press Menu 12-5-3 (Extras - Stopwatch - Split timing). You can
select Continue if split timing was set previously, but was interrupted
(e.g. if you received an incoming call and navigated away from the
Stopwatch menu).
2 Press Start to start the time observation.
3 Press Split every time you want to take an intermediate time.
The intermediate times are listed below the running time on the
display. Scroll to view the times.
4 Press Stop to end the timing. Once the timing has been stopped, press
Options and choose from the following options:
Press Start to start the time observation again. The new time is
•
added to the previous time.
Press Save to save the time. Key in a name for the measured
•
time and press OK. If no name is keyed in, the total time is
used as a title.
Press Reset to reset the time without saving it.
•
Lap times
1 Press Menu 12-5-4 (Extras - Stopwatch - Lap timing).
2 Press Start to start the time observation and Lap to take a lap time.
3 Press Stop to stop the lap timing.
Once the lap timing has been stopped, press Options and choose from
the following list:
Start to start another lap timing
•
Save to save the time
•
Reset to reset the lap times
•
[ 87 ]
Extras
12