Chevrolet Malibu 2007 Owner's Manual page 250

Adjusting the Speakers (Balance/Fade)
S
BAL /FADE /
To adjust the balance between the right and the
left speakers, push and release the balance
and fade button until BAL (balance) displays.
Turn the ADJ (adjust) knob to move the sound
toward the right or the left speakers.
To adjust the fade between the front and rear
speakers, push and release the balance and
fade button until FADE displays. Turn the
ADJ knob to move the sound toward the
front or the rear speakers.
To adjust balance or fade to the middle position,
select BAL or FADE. Then press and hold
the balance and fade button for more than
two seconds. The display level adjusts to the
middle position and a beep sounds.
To adjust both speaker controls to the middle
position, press and hold the tone button when no
speaker control is displayed. ALL CENTERED
displays and a beep sounds.
250
(Balance / Fade):
Finding a Program Type (PTY) Station
(RDS and XM™)
To select and find a desired PTY perform the
following:
1. Press the P-TYPE button to activate program
type select mode. PTY for FM or PTYPE for
XM and a program type displays.
2. Turn the ADJ knob to select a PTY.
3. Once the desired PTY displays, press the
w
up SEEK arrow to select and go to the
PTY's first station.
4. To go to another station within that PTY press
w
the up SEEK arrow again. If the radio
cannot find the desired PTY, NONE FOUND
displays and the radio returns to the last
station you were listening to.
5. Press P-TYPE to exit program type
select mode.
If PTY times out and no longer displays,
go back to Step 1.
If both P-TYPE and TRAF are on, the radio
searches for stations with the selected PTY
and traffic announcements.