Lid Lock - GE PTAN9150MWW Technical Service Manual

Lid Lock Step 3 (cont.)
•If the PCB still detects power through terminal 5 after a few pulses, the PCB will emit a maximum of 5
pulses to disengage the contact and cut power through terminal 5. If this fails, the control will indicate a
Failure code F8
• Unit will then attempt the sequence, a maxium of 2 other times (3 in total). If the lid still can't be locked,
an ERROR code Er8 will be shown and unit no longer operate until unplugged and replugged or serviced.
44