Configuration | Interface | Ge-1 Or Ge-2 - Comtech EF Data CDM-800 Installation And Operation Manual

CDM-800 Gateway Router
Ethernet-based Remote Product Management
* Auto is the recommended configuration selection.
•
Negotiated Link Mode (read‐only) – The actual negotiated line speed and duplex setting for
the FE Interface is displayed here.
The viewable settings are:
o 10 BaseT / Full Duplex
o 10 BaseT / Half Duplex
Set the desired configurations on this page. Click [Submit] to save.
5.4.4.3.1.2 Configuration | Interface | GE-1 or GE-2
The 'Configuration | Interface | GE‐1' and 'GE‐2' pages permit the user to configure the rear
panel 'GE1' or 'GE2' 10/100/1000 BaseT Gigabit Ethernet ports.
GE-1 Interface or GE-2 Interface
The information and configuration options provided on these pages are identical to those
featured on the 'Configuration | Interface | FE Mgt' page. See Sect. 5.4.4.3.1.1 for information
about using these features.
o 100 BaseT / Full Duplex
o 100 BaseT / Half Duplex
Figure 5‐10. Configuration | Interface | GE‐1 or GE‐2 Page
5–19
Revision 1
MN-CDM800