Clearances - Heatilator RAVE3012I Owner's Manual

C. Clearances
NOTICE: Install appliance on hard metal or wood surfaces
extending full width and depth. DO NOT install directly
on carpeting, vinyl, tile or any combustible material other
than wood.
WARNING! Risk of Fire! Maintain specifi ed air space
clearances to appliance and vent pipe:
• Insulation and other materials must be secured to prevent
accidental contact.
• The chase must be properly blocked to prevent blown
insulation or other combustibles from entering and
making contact with fi replace or chimney.
• Failure to maintain airspace may cause overheating and
a fi re.
Note: Figure 5.2 shows the fi replace installed on the
fl oor. However, this fi replace can be elevated off the fl oor
provided that the fi replace is properly supported by framing
materials and the ceiling clearances are maintained.
B
D
A
Rough
Opening
(Vent Pipe)
Inches
8-5/8
Millimeters
219
Figure 5.2. Clearances to Combustibles
A
C
MINIMUM FRAMING DIMENSIONS*
B C D
Rough Rough Rough
Opening Opening Opening
(Height) (Depth) (Width)
36-1/2 18-1/4 37-3/4
927 464 959
Heatilator • RAVE3012I • 2269-901 Rev. E • 4/12
F
J
G
E F G
Clearance Combustible Combustible
to Ceiling Floor Flooring
31 0
787 0
MEASURE FROM TOP
OF FIREPLACE OPENING
H
I
H I
Behind Sides of
Appliance Appliance
0 1 1/2
0 25 13
E
J
Front of
Appliance
36
914
19