Framing And Clearances; Selecting Appliance Location - Heatilator RAVE3012I Owner's Manual

5 5

Framing and Clearances

A. Selecting Appliance Location
When selecting a location for the appliance it is important to
consider the required clearances to walls (see Figure 5.1).
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be locat-
ed out of traffi c and away from furniture and draperies.
NOTICE: Illustrations refl ect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
E
1 IN.
A
Inches
Millimeters
Figure 5.1 Appliance Locations
A
B
C
TOP VENT
ONE 90 0 ELBOW
A B
46-3/4 37-5/8
1188 956
Heatilator • RAVE3012I • 2269-901 Rev. E • 4/12
It is important to follow the framing and fi nishing instruc-
tions step by step to ensure proper placement of fi replace
in the surrounding framing/fi nishing materials.
Unlike many traditional, single sided Heatilator fi replaces,
the RAVE3012I is recessed into surrounding framing. The
left and right nailing tabs were designed to ensure the
fi replace is recessed to the correct location within the framing
materials. Refer to Section 13 for detailed instructions on
fi nishing.
D*
ALCOVE
INSTALLATION
TOP VENT
ONE 90° ELBOW
B
C D
63-1/8
See Section D.
Figure 5.5 & 5.6
1603
F
E F
15-1/16 18-3/4
383 476
17