Manual Programming; Weekday/Weekend Programming - Hunter Set & Save 47350A Owner's Manual

41659_model47350A_web.pmd
18
PROGRAMMING

Manual Programming

Your thermostat can be programmed for week-
days and weekends, or have unique programs for
all 7 days. Use Weekday/Weekend Programming
below or 7-day Programming on page 21 to enter
or revise programs to match your Personal Pro-
gram Schedule.
Familiarize yourself with Manual Programming, so
that you can easily modify your programs as your
comfort needs change. The example below dem-
onstrates how to program your thermostat.
19

Weekday/Weekend Programming

system
off
NOTE: If the system selector is in the OFF position, no programming is
permitted. The LCD display will show only dashes when the program key is pressed.
STEP 1:
STEP 2:
STEP 3:
Slide System Selector Switch to HEAT or COOL to
program the corresponding system.
heat
cool
Press to enter program mode. HEAT or COOL will
program
be displayed on the LCD.
The Program hour and AM or PM indicator are
flashing. Press to change the hour.
Press again to change to the minute position.
program
The current minute will be flashing.
Press to change the minute.
NOTE: 1) The program time can be set in 10
minute increments, and remains the
same for both Heat and Cool programs.
2) The program temperature can be set
in increments of 1 C (1 F).
3) After 15 seconds without a key press,
the thermostat will return to normal
display mode.
4) When setting the program time, note
the AM / PM indicator.
5) With the Auto Recovery feature en-
abled, you do not need to set your
comfort program times early. Auto
Recovery will determine how early to
turn your system on, so that the room
is comfortable at the program time.
M T W TH F
AM
1
HEAT
M T W TH F
AM
1
HEAT
18
(continued)