Table of Contents
Advertisement
Setting the Camera Image Properties
VIEWING
FLIP
ID DISPLAY
SHARPNESS
BRIGHTNESS 110 80
RESOLUTION
NORMAL
COLOR ADJ.
0
-8
PREVIOUS PAGE .
The table below explains the options on the VIEWING menu.
>FLIP
> ID DISPLAY.
CAMERA ID SETUP
CAMERA ID
ID POSITION
UP-LEFT
>
PREVIOUS PAGE .
>ID POSITION
>SHARPNESS
>BRIGHTNESS
Document 800-04763 Rev B
08/09
OFF
<OFF>
NORMAL
130
&
8
&
Select either:
<ON> to reverse the image horizontally on the video monitor, or
<OFF> (default)
Select ON to open the CAMERA ID SETUP screen where you
can add a CAMERA ID (title) of up to 8 characters.
Move the cursor (>) to CAMERA ID, then press
character appears. Press
press
to move to the next character.
When you are satisfied, press
another item.
Select where you want the Camera ID to appear on the monitor
screen Select from the list:
<UP-LEFT>, <UP-CENTER>, <UP-RIGHT>, <DOWN-
LEFT>, <DOWN-RIGHT>
Select the level of sharpness of the image. Choices are:
<NORMAL> (default)
<SHARP>
<SOFT>
While observing the video monitor, move the cursor to adjust the
overall brightness level, from 80 to 130 (110 is the default).
, or
!
#
to change the character, then
$
%
, or
and move the cursor to
. The first
37
Advertisement
Table of Contents
