Table of Contents
Advertisement
Ceiling or Wall
Mount (without
back box)
Configuring
To configure a 540 TVL camera, see
the camera
(See note)
To configure a WDR camera, see
To configure a DNR camera, see
Installing the
turret
Installing the
lower dome
Note
The back box is not supplied. Also, if you have a BNC
connection and are installing the HD5 with a back box, you
will need to purchase the Back Box Extender kit. Contact
Honeywell Customer Service to order (see the back cover for
contact information).
Note
The camera configuration process is different for WDR and
DNR camera types.
Installing the Lens
The HD5 is shipped with one of four lenses (Manual or Auto Iris 2.7-13.5
mm; Manual or Auto Iris 5-50 mm). Installing an Auto Iris lens involves an
extra step, which is to connect the
Document 800-04763 Rev B
08/09
Ceiling or Wall
Mount (with back
box) (See note
on page 17)
see
Setting Up the Camera
see
Ceiling or Wall Mount
lens control
Pendant Dome
Configuring a 540 TVL Camera
page 28.
Configuring a WDR Camera
30.
Configuring a DNR Camera
on page
on page
52
cable. See
on
on page
on page 41.
24
see
Pendant Mount
on page
53
step
3.
17
Advertisement
Table of Contents
