7-Day Programming - Hunter 44760 Owner's Manual

41652_model44760_web.pmd
26
PROGRAMMING

7-Day Programming

Step 1
on off em
system
program
Step 2
prog-day
Step 3
program
Step 4
27
Step 5
program
Step 6
program
Step 7 prog-day
Step 8
ret-clear
Step 9
system
Slide Power Switch to ON.
Press to select HEAT or COOL to program the corresponding system.
(Auto may be selected, but does not affect the programming steps)
Press to enter program mode, display shows weekday programs.
Press 2 times to reach the Monday program.
The Program hour and AM or PM indicator are flashing. Press
or to change the hour.
Press again to change to the minute position. The current minute will
be flashing.
Press or to change the minute.
Press again to change to the program temperature. The current
temperature will be flashing.
Press or to change the temperature.
Press to move to programs 2, 3 and 4.
Repeat Steps 3 through 5 to complete the programs for Monday.
Press to change to the next day's programs.
Repeat Steps 3 through 6 to complete the selected day's programs.
Continue repeating Steps 3 through 7 to program all 7 days of the week.
When finished, press to return to normal mode.
After 15 seconds, the thermostat will return to normal mode automatically.
Change to the other system and repeat steps 2 through 8 above.
26
Thursday
2
Temp
AM
System Fan
Monday
1 2 3 4
Temp
AM
System Fan
Monday
1 2 3 4
Temp
AM
System Fan
Monday
1 2 3 4
Temp
AM
System Fan