Mackie MDR 24/96 Operation Manual page 44

Solo (Remote Only): This choice is available for the Remote Footswitch but not for the
MDR24/96 Footswitch. Although you cannot solo a track on the MDR directly, it can be
soloed with a footswitch attached to a Remote 24. The footswitch solos the channel
displayed in the Track Number window on the Remote 24. The meters on the MDR24/96
will continue to display signal on all of the tracks with audio, but the MDR24/96 will output
audio from only the soloed track. Press the footswitch again with the same track selected
to disengage the solo function and to return the MDR24/96 to regular operation. You can
also select a different channel on the Remote 24 and press the footswitch to solo that
channel instead.
To change footswitch function for the MDR24/96 or a Mackie Remote:
1. Press the front panel SYSTEM button.
2. Press the Right Arrow button to move to
the second page.
3. Now press either the Footswitch MDR or
the Footswitch Remote select button.
4. Use the << and >> select buttons to change the assignment of the selected footswitch.
Press the OK select button to choose a setting. The MDR 24/96 has four functions that
can be assigned to the footswitch; the remote adds a fifth.
44
MDR 24/96
<- SYSTEM MENU
Footswitch
MDR Remote Clock About
[2]