Fujitsu LifeBook C6544 User Manual page 83

Setup Item
Interrupt
I/O address
DMA channel
Parallel port
Mode
I/O address
Interrupt
Table 1-4 Advanced - Serial/Parallel Port Configuration menu options
Selections
IRQ 3
IRQ 4
IRQ 10
IRQ 11
100 - 107
108 - 10F
110 - 117
118 - 11F
DMA 1
DMA 3
Disabled
Enabled
Auto
Output only
Bi-directional
ECP
378 - 37F
278 - 27F
3BC - 3EF
IRQ 5
IRQ 7
Note (Item Specific Help)
S This option is available when Serial port B is
'Enabled'.
Set the interrupt for serial port B.
S This option is available when Mode for Serial
port B is set to 'FIR'.
Set the base I/O address for the FIR of serial
port B.
S This option is available when Mode for Serial
port B is set to 'FIR'.
Set the DMA channel for the FIR of serial port
B.
S Configure parallel port using options:
[Disabled] No configuration
[Enabled] User configuration
[Auto] BIOS or OS chooses configuration
S This option is available when Parallel port is
'Enabled'. When you change this mode to
'ECP', 'DMA 1' is selected by default.
Set the mode for the parallel port.
S This option is available when Parallel port is
'Enabled'.
Set the base I/O address for the parallel port.
S This option is available when Serial port B is
'Enabled'.
Set the interrupt for the parallel port.
73