Table of Contents
Advertisement
(
Floppy Disk Drive Access (
Stays on when the floppy disk is being accessed.
)
PC Card Access (
Stay on when the corresponding PC card is being accessed.
~
Num Lock (
1
Stays on when the keyboard is in the numeric lock mode. Press [Num Lk] to turn on and off
the numeric lock mode.
+
Caps Lock (
A
Lit when the personal computer is placed into the Caps Lock mode (letters are entered all in
uppercase). Press [Caps Lock] while holding down [Shift] to turn on and off the Caps Lock
mode.
,
Scroll Lock (
Lit when the personal computer is set up so that the screen will not scroll at all (scroll lock).
Press [Screen Lk] while holding down [Fn] to turn on and off the scroll lock mode. The operation
of the personal computer depends on the application that is being executed.
Critical Points
Data on the hard disk drive or floppy disk drive may be corrupted if you turn off the MAIN
switch or manipulate the SUS/RES switch when the Hard Disk Drive Access or Floppy Disk
Drive Access indicator is on.
While the MAIN switch is set to OFF, all CoolView illuminators are off except when the battery
is being charged.
Under some optional OSes, PC Card Access display "Slot 1" may appear as "Slot 0" and "Slot
2" as "Slot 1."
Checks for the presence or absence of a CD are made periodically if the automatic CD insertion
feature is enabled. Accordingly, the CD Access illuminator on the CoolView lights periodically.
Follow the steps shown below to disable the automatic CD insertion feature.
1
Click [Start], [Settings], and [Control Panel] in that order.
2
Click [
] (System).
3
Click the [Device Manager] tab.
4
Click [
] to the left of [CD-ROM].
A CD-ROM device will appear.
5
Click the CD-ROM device and click [Properties].
The [CD-ROM Device Properties] dialog will box appear.
6
Click the [Settings] tab.
7
Click and uncheck [Automatically notify insertion] under "Options."
8
Click [OK].
9
Click [OK] or [Close] in the [System Properties] dialog box.
You will be brought back to the [Control Panel] window.
10 Restart the personal computer.
To re-enable automatic CD insertion, click and check [Automatically notify insertion] in Step 7.
)
)
1
2
)
)
)
13
Advertisement
Table of Contents
