Fujitsu LifeBook C6544 User Manual page 82

1.2.1 Advanced - Serial/Parallel Port Configuration Menu
Main
Serial/Parallel Port Configuration
Serial port A:
I/O address:
Interrupt:
Infrared port:
Mode:
I/O address:
Interrupt:
I/O address:
DMA channel:
Parallel port:
Mode:
I/O address:
Interrupt:
F1 Help
ESCExit
Figure 1-4 Advanced - Serial/Parallel Port Configuration menu
Setup Item
Serial port A
I/O address
Interrupt
Infrared port
Mode
I/O address
72
PhoenixBIOS Setup Utility
Advanced Security
[Enable]
[3F8-3FF]
[IRQ 4]
[Enabled]
[FIR]
[2E8-2EF]
[IRQ 3]
[118-11F]
[DMA 3]
[Enabled]
[Bi-directional]
[378-37F]
[IRQ 7]
↑↓
Select Item -/Space
←→
Select Menu Enter
Selections
Disabled
Enabled
Auto
3F8 - 3FF
2F8 - 2FF
3E8 - 3EF
2E8 - 2EF
IRQ 3
IRQ 4
IRQ 10
IRQ 11
Disabled
Enabled
Auto
IrDA
FIR
3F8 - 3FF
2F8 - 2FF
3E8 - 3EF
2E8 - 2EF
Power Boot Info
Item Specific Help
[Disabled]
The port is
disabled.
[Enabled]
The port is enabled
with user configura-
tion
[Auto]
The port is
configured depending
on 'Plug & Play OS'
setting.
Change Value F9 Setup Defaults
Select :Sub-Menu F10Save and Exit
Note (Item Specific Help)
S Configure serial port A using options:
[Disabled] No configuration
[Enabled] User configuration
[Auto] BIOS or OS chooses configuration.
S This option is available when Serial port A is
'Enabled'.
Set the base I/O address for serial port A.
S This option is available when Serial port A is
'Enabled'.
Set the interrupt for serial port A.
S Configure serial port B using options:
[Disabled] No configuration
[Enabled] User configuration
[Auto] BIOS or OS chooses configuration
This option is available when Serial port B is
S
'Enabled'.
Set the mode for serial port B.
S This option is available when Serial port B is
'Enabled'.
Set the base I/O address for serial port B.
Exit