Fujitsu LifeBook C6544 User Manual page 79

1.1.1 Main - Primary Master, Secondary Master Menu
Main
Primary Master [FUJITSU MHH2064AT-(PM)]
Type:
Maximum Capacity:
Multi-Sector Transfers: [16 Sectors]
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1 Help
ESCExit
Figure 1-2 Main - Primary/Secondary Master Menu
Selections
Setup Item
Auto
Type
None
CD-ROM
ATAPI Removable
Hardisk
Maximum Capacity xxxx MB
Multi-Sector Disabled
Transfers 2 Sectors
4 Sectors
8 Sectors
16 Sectors
MAX 32
MAX 64
MAX 128
PhoenixBIOS Setup Utility
Advanced Security Power
[AUTO]
12073 MB
[Enabled]
[Fast PIO 4]
[Ultra DMA 2]
↑↓
Select Item -/Space
←→
Select Menu Enter
Boot Info Exit
Item Specific Help
Select ATA/ATAPI
drive installed
here.
[AUTO]
The BIOS auto-types
the drive on boot
time.
Except [Auto]
You enter parameters
of the drive.
[None]
The drive is
disabled.
Change Value F9 Setup Defaults
Select :Sub-Menu F10Save and Exit
Note (Item Specific Help)
Select ATA/ATAPI device type. If 'Auto' is
selected, the type is automatically identified
at POST by the BIOS. It does not carry out
Cylinder/Head/Sector display in the case of
over 8.4GB-HDD when Auto mode.
Hard Disk = you enter parameters of hard-
disk drive installed at this connection.
CD-ROM = a CD-ROM drive is installed here.
ATAPI Removable = removable disk drive is
installed here.
If 'None' is selected, all of the following setup
items do not appear. When 'User' is selected,
you can specify Cylinders, Head and Sectors.
Auto=autotypes ATA/ATAPI drive installed
here.
Display maximum capacity calculated from
parameters of hard disk when 'Auto' is
selected and the type is identified as hard
disk, or 'User' is selected.
S This option can not be changed when 'Auto'
is selected.
Specify the number of sectors per block for
multiple sector transfer. 'MAX' refers to the size
the disk returns when required.
69