List of Functions
Extended Menu
Submenu
You can make settings related to the projector's display.
Display
Messages: When set to Off, the following items will not be
displayed.
Item names when the Source, Color Mode, or Aspect Ratio
is changed, messages when no signal is being input, and
warnings such as High Temp Warning.
Display Background
to Black, Blue, or Logo when no image signal is available.
Startup Screen
when projection starts.
A/V Mute
remote control's [A/V Mute] button is pressed to Black,
Blue, or Logo.
User's Logo
*1
You can change the user's logo that is displayed as a
background during Display Background, A/V Mute, and so
on.
s "Saving a User's Logo"
Function
*1
: You can set the screen background
*1
: Set to On to display the User's Logo
*1
: You can set the screen displayed when the
p.47
Submenu
Projection
Select from one of the following projection methods
depending on how the projector is installed.
Front, Front/Ceiling, Rear, and Rear/Ceiling
You can change the setting as follows by pressing down
the [A/V Mute] button on the remote control for about five
seconds.
FrontWFront/Ceiling
RearWRear/Ceiling
s "Installation Methods"
Direct Power On: Set to On to turn on the projector
Operation
simply by plugging it in.
When the power cable is plugged in, note that the projector
turns on automatically in cases such as a power outage
being restored.
Sleep Mode: When set to On, this automatically stops
projection when no image signal is being input and no
operations are carried out.
Sleep Mode Timer: When Sleep Mode is set to On, you
can set the time before the projector automatically turns off
within a range of 1 to 30 minutes.
High Altitude Mode: Set to On when using the projector
above an altitude of 1500 m.
When set to Communication On, you can monitor and
Standby Mode
control the projector from a computer, even if the projector
is in standby mode.
s "Monitoring and Controlling"
USB Display: Enables USB Display.
USB Type B
s "Projecting with USB Display"
Link 21L: Enables ESC/VP21 commands.
s "ESC/VP21 Commands"
You can set the language for messages and menus.
Language
61
Function
p.19
p.53
p.28
p.53