IBM eServer xSeries 345 Type 8670 User Manual page 36

24
IBM xSeries 345 Type 8670: User's Guide
3. Click Next. The "Create arrays" window opens.
4. From the list of ready drives, select the two drives you want to move to the
array.
(Add selected drives) to add the drives to the array.
5. Click
6. Complete the following steps, if you want to configure a hot-spare drive:
a. Click the Spares tab.
b. Select the physical drive you want to designate as the hot-spare drive;
then, click
7. Click Next. The "Configuration summary" window opens.
(Add selected drives).