Small Form Factor Computer - Front View - Dell OptiPlex GX620 Quick Reference Manual

4 voltage selection switch
(may not be available on
certain computers)
5 padlock ring
6 cover release latch
Small Form Factor Computer — Front View
11 10
1 USB 2.0 connectors (2)
2 power button
3 Dell badge
4 LAN indicator light
Your computer is equipped with a manual voltage-selection switch.
To help avoid damaging a computer with a manual voltage-selection switch, set
the switch for the voltage that most closely matches the AC power available in
your location.
Also, ensure that your monitor and attached devices are electrically rated to
operate with the AC power available in your location.
Insert a padlock to lock the computer cover.
Use this latch to open the computer cover.
1
9 8 7
Connect USB devices such as a mouse, keyboard, memory key, printer, joystick,
and computer speakers into either of the USB connectors.
It is recommended that you use the back USB connectors for devices that typically
remain connected, such as printers and keyboards.
Press this button to turn on the computer.
NOTICE:
To avoid losing data, do not turn off the computer by pressing the
power button for 6 seconds or longer. Instead, perform an operating system
shutdown.
NOTICE:
If your operating system has ACPI enabled, when you press the power
button the computer will perform an operating system shutdown.
The badge can be rotated to match the orientation of your computer. To rotate
the badge, place fingers around the outside of the badge, press firmly, and turn the
badge. You can also rotate the badge using the slot provided near the bottom of
the badge.
This light indicates that a LAN (network) connection is established.
2 3
Quick Reference Guide
4
5
6
13