Settings
u
u
î
Program
0
î
d
Program
74
Flash time
Note: This feature is only supported for the Dialog 4147
phone.
Some systems require a different flash time for the R-key. You can
set two different flash times (timed breaks). To find out if you have
to change the flash time, proceed as follows:
Lift the handset.
z
Make a call using any of the services that require R.
If you cannot use the service, you need to change the flash time.
Change flash time:
Lift the handset.
Wait for the dial tone.
2
Press.
1
Press.
or
Press.
0=100 ms and 1=600 ms. Default setting is digit 0.
Press.
Replace the handset to finish the procedure.
Dialog 4106 Basic/Dialog 4147 Medium