Ericsson Dialog 4106 Basic User Manual page 11

Dialog 4106 Basic/Dialog 4147 Medium
1 Program
Store frequently used numbers, see section
page 27.
2 Message Waiting / 2nd
a. A flashing light indicates a waiting message. See section
"Messages" on page 56.
b. Key for access to secondary key functions (these functions are
stated on the second line of the corresponding key).
3 Programmable keys
Eight keys for storing frequently used numbers. You can store two
numbers per key, see section
4 Mute
Switch microphone on or off. See section
page 36.
5 Loudspeaker on/off / Headset key
a. Switch loudspeaker on or off. See section
page 36.
b. Activate headset. See section "Headset" on page 73.
6 Last number redial / Pause key
a. Redial last dialed number. See section
page 23.
b. Insert a pause if you have to wait for dial tone. See section
for dial tone" on page 21.
7 R-key
Used for example to make an inquiry, to transfer a call or to
establish a conference, see section
Note: Sometimes it is necessary to change the flash time
for the R-key, see section
8 Volume control
Adjust the volume.
9 Headset / Loudspeaker switch
a. In headset position, the Loudspeaker key activates a connected
headset. See section "Settings" on page 68.
b. In loudspeaker position, the Loudspeaker key activates the
loudspaker. See section "Settings" on page 68.
10 Prog On/Off switch
Enable or disable the Program key. See section "Settings" on
page 68.
"Speed
"Speed Dialing" on page 27.
"During Calls" on
"During
"Last Number
"During Calls" on page 36.
"Flash time" on page 74.
Description
Dialing" on
Calls" on
Redial" on
"Wait
11