Installing The Canopy And Canopy Trim Ring - Hunter 42890-01 Owner's Manual And Installation Manual

5-1. Place the fan housing over the motor.
5-2. Align the holes in the fan housing with the holes in the
ceiling plate.
5-3. Partially install each canopy screw into the holes in the
fan housing and into the ceiling plate until all holes are
aligned. Securely tighten all screws.
5 • Installing the Motor Housing
8
42890-01 • 02/18/10 • Hunter Fan Company
Canopy
Screw
Canopy
Housing
Steps 5-1 – 5-3
Canopy Screw