Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Catalog No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42890-01
20100218
©2010 Hunter Fan Co.
Type A Models
Type A Models
Type A Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter 42890-01
Summary of Contents for Hunter 42890-01
- Page 1 __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Catalog No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 42890-01 20100218 ©2010 Hunter Fan Co. Type A Models Type A Models Type A Models Owner’s Guide and Installation Manual...
-
Page 2: Table Of Contents
• READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING INSTALLATION. SAVE THESE INSTRUCTIONS. • Use only Hunter replacement parts. • To reduce the risk of personal injury, attach the fan directly to the support structure of the building according to these instructions, and use only the hardware supplied. - Page 3 To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. CAUTION: To reduce the risk of personal injury, attach the fan directly...
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer 42890-01 • 02/18/10 • Hunter Fan Company Ceiling Plate 3” Wood Screw Steps 2-4 – 2-6... -
Page 6: Assembling The Fan
WARNING: Fan may fall if not assembled as directed in these installation instructions. 3-1. Lift the motor assembly and hook the three tabs over the handles, one at a time. Handle Step 3-1 42890-01 • 02/18/10 • Hunter Fan Company... -
Page 7: Hanging And Wiring The Fan
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42890-01 • 02/18/10 • Hunter Fan Company... -
Page 8: Installing The Canopy And Canopy Trim Ring
5 • Installing the Motor Housing 5-1. Place the fan housing over the motor. 5-2. Align the holes in the fan housing with the holes in the ceiling plate. 5-3. Partially install each canopy screw into the holes in the fan housing and into the ceiling plate until all holes are aligned. -
Page 9: Assembling The Blades
Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. -
Page 10: Completing Your Installation With Or Without A Light Fixture
7 • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. - Page 11 Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws. 42890-01 • 02/18/10 • Hunter Fan Company Steps 7-6 – 7-7 Lower Switch...
- Page 12 7-8. Place globe over threaded lampholder in cup. 7-9. Install and hand tighten threaded lock washer on lampholder. 7-10. Install 60 Watt max (Type B10) candelabra base bulbs into the sockets. 42890-01 • 02/18/10 • Hunter Fan Company Bulb Socket Glass Shade...
- Page 13 7-17. Tighten finial on threaded rod. Note: The breakaway connector should stop the pull chain from coming through the finial. 42890-01 • 02/18/10 • Hunter Fan Company Plug Connector Finial Steps 7-15 - 7-17...
-
Page 14: Operating And Cleaning Your Ceiling Fan
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off. • Pull the chain slowly to change settings. -
Page 15: Troubleshooting
Problem: Lights dim when turned on or do not turn on 1. Check to make sure wattage of light bulbs installed match the specifications on the light socket. 42890-01 • 02/18/10 • Hunter Fan Company 9 • Troubleshooting If you need parts or service assistance, please call...