Care And Cleaning; Cleaning The Scanner Glass Surfaces - Microtek ArtixScan DI 2125c User Manual

Care and Cleaning

To ensure optimal performance from the ArtixScan DI 2125c, it is important to
clean several critical parts of the scanner on a regular basis.

Cleaning the Scanner Glass Surfaces

1. To open the scanner cover, hold the two sides of the scanner cover and pull
2. When the scanner cover is opened, you can find two scanner glass surfaces
Note: Do not use any detergents, synthetic cleaning solutions, cleaning naphtha,
or other solvents to clean the glass surface directly. To remove stains, use cotton
swabs moistened with rubbing alcohol.
them up firmly.
Scanner cover
locating at the bottom of the scanner and the inner side of the scanner cover.
Use a soft, non-abrasive and lint-free cloth to gently wipe the glass surface
areas.
The inner side of the
scanner cover
The bottom of the scanner
ArtixScan DI 2125c User's Manual 35