Hunter 41545 Installation And Operation Manual page 19

5. Connect the upper plug connec-
tor from the motor to the lower
plug connector in the lower
switch housing assembly. See Fig-
ure 8c.
Note: Both plug connectors are
polarized and will only fit together
one way. Make sure that both
connectors are properly aligned
before connecting them together.
Incorrect connection could cause
improper operation and damage
to the product.
6. Place the lower switch housing
assembly over the upper switch
housing. Align the side screw
holes in the upper and lower
switch housings. Attach the lower
switch housing to the upper
switch housing with three #6-32
x 3/8" housing assembly screws.
See Figure 8c.
41545-01 6/10/2002
Lower Plug Upper Plug
Connector
Connector
Housing
Assembly
Screw
Figure 8c - Plug Connection and Lower
Switch Housing Installation
Note: If your fan does not include
a light fixture, you may purchase
an accessory light kit separately.
Upper
Switch
See STEP 9 - INSTALLING LIGHT
Housing
FIXTURE.
Lower
Switch
Housing
®
19