Pontiac Solstice 2008 Owner's Manual page 273

Accessing the Tire Sealant and
Compressor Kit
To access the tire sealant and compressor kit:
1. Make sure the convertible top is in the up position
before accessing the tire sealant and compressor kit.
2. Open the trunk. See Trunk on page 2-9 for more
information.
3. Locate the tire sealant and compressor kit on the
driver side of the vehicle, near the back corner of
the trunk.
5. Remove the sealant and compressor kit from its
foam container.
Tire Sealant
Read and follow the safe handling instructions on the
sealant canister.
The sealant can temporarily seal a punctures up to
1/4 inch (6 mm) in the tread area of the tire. The sealant
cannot seal sidewall damage, large punctures, or a
tire that has unseated from the wheel. See Roadside
Assistance Program on page 7-7 if you need assistance.
The sealant can only be used to seal one tire.
After usage, the sealant canister and sealant filling
hose assembly must be replaced at a dealer/retailer.
See Removal and Installation of Sealant Canister later
in this section.
4. Remove the tire sealant
and compressor kit
strap by squeezing the
two tabs of the quick
release buckle.
5-77