Using the Air Compressor without
Sealant to Inflate an Underinflated Tire
(Not Punctured)
To use the air compressor by itself to inflate a tire with
air only and not sealant:
1. Remove the air compressor inflating hose connector
from the bottom of the air compressor.
2. Unlock the air compressor hose from the sealant
canister by pulling up on the lever.
3. Pull the air compressor inflator hose from the
sealant canister.
5-82
4. Push the air compressor inflator hose onto the
tire valve stem and push the lever down to secure
in place.
5. Plug the air compressor accessory plug into
an accessory power outlet in the vehicle.
See Accessory Power Outlet(s) on page 3-16
for more information.
CAUTION:
{
Idling the engine in a closed-in place or with
the climate control system off can cause
deadly carbon monoxide (CO). See Engine
Exhaust on page 2-29.
6. Start the vehicle. See Starting the Engine
(Key Access) on page 2-20 for more information.
The vehicle must be running while using the
air compressor.