Additional Features; Programming Chime Zones; Keypad Muting; Panic Alarms - Paradox 1686V User Manual

5.0 Additional Features

Each keypad must be Chime Programmed and
Muted separately. Keypad Muting must be re-
programmed if your system suffers a total power loss.
When you press and hold a button and the keypad
emits a confirmation beep, the chime feature has
been enabled for that zone or Keypad Muting has
been enabled for that keypad. If the keypad emits a
rejection beep, these features have been disabled.

5.1 Programming Chime Zones

This feature allows you to program which zones will be
Chime enabled. A Chime-enabled zone will advise you
every time it is opened by causing your keypad to emit a
rapid intermittent beep tone (
and hold any button from [1] to [10] for 3 seconds to
activate or deactivate chiming for zones 1 to 10. For
example, press and hold the [1] button to enable chiming
on zone 1.

5.2 Keypad Muting

Press and hold the
or disable keypad muting. When muted, the keypad will
only emit the confirmation beep, rejection beep, and beep
when a button is pressed.

5.3 Panic Alarms

In case of an emergency, the Spectra system provides three
panic alarms that can immediately generate an alarm after
22 User's Guide
BEEP
[ ]
button for 5 seconds to enable
CLEAR
- - -
BEEP BEEP
). Press
BEEP