5.0 ADDITIONAL FEATURES
Each keypad must be Chimed and Muted separately.
Chime Zones and Keypad Muting must be re-
programmed if your system suffers a total power loss.
5.1 PROGRAMMING CHIME ZONES
A Chime Enabled zone will advise you every time it is opened
by causing your keypad to beep.
To remove the Chime feature from a zone, in Step 2 enter the
zone number again so the number extinguishes or press
[
] to remove Chiming from all zones programmed to
FORCE
Chime. When you program Chime Zones, once you press
and hold the [9] button the [
[
], [
], and [
BYP
MEM
are already Chimed will also illuminate. Zones that remain off
or extinguished are not Chimed.
28 User's Manual
For Spectra 1689 LED Keypad:
How Do I Chime Zones?
1) Press & hold the [9] button for 3 seconds
2) Illuminate the numbers corresponding to
the zones you want to Chime by entering
the two-digit zone number. For example,
to Chime zone 2 enter [0] then [2].
3) Press the [
ARM
] symbols will flash. Any zones that
TRBL
] button to save & exit.
ENTER
1], [
1], [
STAY
2], [
ARM
STAY
2],