How do I Force arm?
1. Close zones in the desired partition (except Force zones).
2. Press the [
3. Enter your [
If you have access to both partitions (see page 9):
4. Buttons [1] and [2] will flash. Press the button
corresponding to the desired partition. For both partitions,
press the other button after the confirmation beep.
When you correctly Force arm the system, the
corresponding to the armed partition will turn on and the
Exit Delay will initiate (see page 13). Force arming can also
be activated by using One-Touch Force arming (see
page 20).
4.6 Manual Bypass Programming
Manual Bypass Programming allows you to program the
alarm system to ignore (deactivate) specified zones the
next time the system is armed. For example, you may wish
to bypass certain zones when workers are renovating part
of your establishment. Please note that a Fire Zone cannot
be bypassed.
] button.
FORCE
ACCESS CODE
].
Spectra LED Keypads 17
light
ARM