Connecting the Connection Cord
The indoor unit is powered from the outdoor unit via the connection cord.
1
Remove the screws on the electrical component box and remove the
cover plates.
2
Route the connection cord through the conduit hole of side of the indoor
unit and connect the cable to terminals as shown in page 42.
3
Route the other end of the cable to the outdoor unit through the ceiling &
the hole on the wall.
4
Reassemble the electrical component box cover, carefully tightening the
screws.
5
For further details on how to plug the other end of the connection cord
into the outdoor unit, refer to page 48.
Cable Clamp
41
E-