Qos Qcl Delete - Planet WGSD-10020 User Manual
8-port 10/100/1000 mbps (poe plus) +2 100/1000x sfp managed ethernet switch
Hide thumbs
Also See for WGSD-10020:
- User manual (556 pages) ,
- Command manual (433 pages) ,
- Quick installation manual (16 pages)
Table of Contents
Advertisement
<dei>
: Drop Eligible Indicator: 0-1 or 'any'
<smac>
<dmac_type>
etype
: Ethernet Type keyword
<etype>
: Ethernet Type: 0x600-0xFFFF or 'any' but excluding 0x800(IPv4) and 0x86DD(IPv6)
llc
: LLC keyword
<dsap>
<ssap>
<control>
: LLC control: 0x00-0xFF or 'any'
snap
: SNAP keyword
<pid>
: Protocol ID (EtherType) or 'any'
ipv4
: IPv4 keyowrd
<protocol>
: IP protocol number: (0-255, TCP or UDP) or 'any'
<sip>
: Source IP address: (a.b.c.d/n) or 'any'
<dscp>
<fragment>
<sport>
: Source TCP/UDP port:(0-65535) or 'any',specific or port range
<dport>
: Dest. TCP/UDP port:(0-65535) or 'any', specific or port range
ipv6
: IPv6 keyowrd
<sip_v6>
: IPv6 source address: (a.b.c.d/n) or 'any', 32 LS bits
<class>
: QoS Class: "class (0-7)", default: basic classification
<dp>
<classified_dscp>: DSCP: "dscp (0-63, BE, CS1-CS7, EF or AF11-AF43)"
QoS QCL Delete
Description:
Delete QCE entry from QoS Control list.
Syntax:
QoS QCL Delete <qce_id>
Parameters:
<qce_id>: QCE ID (1-256), default: Next available ID
Default Setting:
disable
range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'any'
: Source MAC address: (xx-xx-xx) or 'any', 24 MS bits (OUI)
: Destination MAC type: unicast|multicast|broadcast|any
: Destination Service Access Point: 0x00-0xFF or 'any'
: Source Service Access Point: 0x00-0xFF or 'any'
: DSCP:(0-63,BE,CS1-CS7,EF or AF11-AF43)or'any',specific/range
: IPv4 frame fragmented: yes|no|any
: DP Level: "dp (0-1)", default: basic classification
User's Manual of WGSD-10020 Series
486
Advertisement
Table of Contents
