GE PSH23PGR Series Technical Service Manual page 32

6. Loosen the 2 screws that hold the icemaker
assembly in place and slide it out of the
freezer compartment.
7. Loosen the 3 screws on the icemaker bracket,
and slide it out of the freezer compartment.
8. Unclip the light bulb sockets from their
mounting holes and disconnect the sockets.
9. Remove the 4 hex-head screws that hold the
freezer evaporator cover in place. Carefully
pull the evaporator cover out of the freezer
compartment.
10. Remove the 4 hex-head screws that hold the
evaporator fan shroud in place ( Fig. 1 and
Fig. 2).
Top Hex-head Screws
Note: The bottom hex-head screws are hidden
under the bottom of the evaporator fan shroud.
Bottom Hex-head Screws
11. Unclip the auger connector plug from the
evaporator fan shroud. Slide the evaporator
fan shroud down and out of the freezer
compartment.
Auger Connector Plug
– 32
Fig. 1
Fig. 2