Welcome; Before You Begin; What's In The Box - Cisco 3G MicroCell User Manual

Welcome

Congratulations on the purchase of the AT&T 3G MicroCell™. The 3G MicroCell provides voice and data service to AT&T
3G wireless phones and devices within a home or small business environment. The 3G MicroCell is secure and can deliver
maximum cellular signal strength within its coverage area – it's like having your own mini cell tower in your home or office.
AT&T recommends that you use the
3G MicroCell. Refer to this User Manual for troubleshooting steps or if you want to configure 'Priority
Mode' on your system (see Option C on page 11).

Before You Begin

To operate the 3G MicroCell, you must have the following items:
• High Speed Internet service over DSL or Cable
• Modem or gateway (a Wi-Fi router is optional)
• Computer with Internet access to register your device
• System Administrators (business customers) see Firewall Specifications on page 5 of this User Manual.
• Please verify these requirements before going any further
Allow up to 2 hours to have your 3G MicroCell up and running. Your part (online activation and equipment setup) takes
10-15 minutes. The additional time is for system configuration and 3G service activation. These tasks are handled by the
3G MicroCell and require no effort on your part.
In order to activate your 3G MicroCell you will be required to enter your
If you have not previously registered for a user name and password, you will be required to do so during the 3G MicroCell setup.

What's in the Box?

• Remove the contents
• Verify that you received the following:
AT&T 3G MicroCell™
Downstream speeds of at least 1.5 Mbps and upstream speeds of at least 256 Kbps are recommended for best performance.
*
There are no restrictions on broadband service providers.
6
AT&T 3G MicroCell™ Getting Started Guide
*
of the AT&T 3G MicroCell
Getting Started Guide
and User Manual
AT&T Online Wireless Account user name and
TM package.
Yellow
Ethernet Cable
for initial setup of your
password.
AC Power
Adapter