③
④
4. JOINT UNIT
• Remove the joint cover from the joint unit by lifting it up from the bottom.
• Remove the 1 piece of screw ① (M1.7 x 4).
• Rotate the A of the joint approx. 90 degree in an arrow direction( Ⅰ ).
• Remove the 1 piece of screw ② (M1.7 x 2).
• Rotate the A of the joint approx. 90 degree in an arrow direction( Ⅱ ).
• Remove the Monitor cover.
• Remove the 1 piece of screw ③ (M1.7 x 2.5).
• Remove the TB-1 PCB ④ .
②
Joint cover
③
- D4 ・ E5700 -
• Remove the LCD ① from the LCD
holder.
• Remove the 2 pieces of solders ② .
• Remove the LCD PCB VF-1 ③ .
• Remove the spacer
LCD holder
①
④
VAA11801-R.3578.A
.
①
A
Monitor cover
②
Ⅰ
Ⅱ