Inspection Standard - Nikon Coolpix 5700 Repair Manual

Inspection standards
Item
External view
Gap/Difference in
height
Outside and inside
status
Operation/Operability
Operation
Operability of buttons
Lever/Knob
Operation touch
Each cover
• General components
Gap: 0.3mm or less
Difference in height: 0.15mm or less
• When the battery cover is closed:
Gap: 0.6mm or less (Difference between right and left must
not be noticeable.)
• Difference in height: 0.3mm or less
(Perform measurement under free condition with battery.)
• There must be no noticeable damage and soil.
• When pushing the main body, noticeable noise must not be
heard.
(Observe and check it by naked eyes under fluorescent lamp
and natural sunshine.)
• While operating, any irregularities or irregular noise shall not
be required.
(Check it by shaking the camera while operating.
Lightly hit the camera onto the Linoleum-laid desk while
operating.)
• No cave-ins of the buttons shall be required.
• Malfunctions shall not be required.
• Operator must feel "click" on each button.
• "Click" must occur when or after a switch is ON.
(Check it while operating normally.)
• When clicking, normal touch shall be required. Any outstand-
ing "caught-in-mechanism" touch or "rubbed-in-mechanism"
touch or play shall not be required.
(Check and observe the condition through normal operation.)
• When operating a lever or knob by hand, any irregular condi-
tions shall not be required.
(Operate the camera in the actual photography procedure and
check the operation touch.)
• When closed, there must not be an extreme play.
• Each cover can be opened/closed without any outstanding
"caught-in-mechanism" touch or "rubbed-in-mechanism"
touch or abnormal noise.
(Open and close each cover and check it.)
- R1 ･ E5700 -
Criteria
VAA11801-R.3578.A
Applied tool(s)
Visual observation
Primary battery/
Secondary battery