④
①
③
⑤
• Remove the Hood VF ① .
• Remove the screw ② (M1.7 x 2.5) .
• Remove the 4 Pieces of screws
• Open the CF card cover ④ .
• Remove the 2 Pieces of screws ⑤ (M1.7 x 4) .
• Carefully remove the Back Cabinet ⑥ from the camera body .
• Remove the FPC ⑦ and the connector ⑧ .
• Remove the Back Cabinet ⑥ .
• Open the Jack cover ⑨ .
• Remove the screw ⑩ (M1.7 x 3), and then remove the Jack Holder ⑪ .
• Remove the Jack cover ⑨ .
②
⑤
FPC ⑦
①
⑪
③
⑩
(M1.7 x 3.5) .
LCD UNIT
④
CONNECTOR ⑤
- D2 ・ E5700 -
VAA11801-R.3578.A
②
⑥
③
③
CONNECTOR ⑧
⑨
• Remove the 2 Pieces of the Pad ① .
• Remove the 2 Pieces of
screws ② (M1.7 x 3).
• Remove the 2 Pieces of
screws
(M1.7 x 4).
③
• Remove the screws
④
• Carefully remove the LCD unit from
the back cabinet.
• Pull out the connector
the back cabinet
③
(M1.7 x 3.5).
from
⑤